Grass Valley NV9608 v.1.0 - Manual (Page 30)

20 Rev 1.0 • 01 Jul 10
4. Configuration
Panel Options
Panel Options
The panel options section, at the right of the configuration page, has two parts: drop-down menus
and checkbox options. These are the drop-down menus:
These are its drop-down menu options:
Panel Type XY/Multi-
destination Modes
The panel configuration allows the operator to switch between X-Y
mode and multi-destination mode at any time.
XY only The panel configuration is restricted to X-Y mode.
Multi-destination
only The panel configuration is restricted to multi-destination mode.
Default Mode X-Y Mode Starts the panel in X-Y mode after a reset. a
Multi-Dest Mode Starts the panel in multi-destination mode after a reset.
Release Mode Normal Release This panel can release “locks” and “protects” set by the designated
user (at this panel or any other panel).
Force Release This panel can release locks and protects set by any user.
Default
Destination None After a reset, the panel displays no destination device. (This is not
recommended.)
‹device› The Panel uses the specified device as the destination after a reset.
(The ‘Default State’ button also returns the panel to this destination.)
Preset Monitor None The preset source video is not sent to a monitor.
‹device› The preset source video for the selected destination appears on the
specified monitor (device).
Status Monitor None The current source video is not sent to a monitor.
‹device› The current source video for the selected destination appears on the
specified monitor (device).