Grass Valley NV9601 v.2.2 - Manual (Page 68)

58
Operation
Setup Mode
Test
In the firmware menu, press selection button 3, corresponding to ‘Test’. The first of several test
patterns appears:
The first test pattern illuminates rows of pixels in the display.
Selection button 8 is illuminated. Press that button to proceed through the other test patterns.
These are the remaining test patterns, in order:
• All buttons are illuminated in low-tally amber.
• All buttons are illuminated in high-tally amber.
• All buttons are illuminated in low-tally green.
• All buttons are illuminated in high-tally green.
• Button test.
In this test, you may press any button. It will blink rapidly for a few moments. When you are
satisfied that the buttons work, press selection button 8 to return to the firmware menu.
When you are finished using the setup menu, press ‘Exit’ to return to the firmware menu.
Press ‘Exit’ again to leave the firmware menu.