Grass Valley NV9601 v.2.2 - Manual (Page 31)

21
NV9601
User’s Guide
• Enable Source Protect.
Check ‘Enable Source Protect’ to allow the panel operator to protect sources.
• Enable Destination Lock.
Check ‘Enable Destination Lock’ to allow the panel operator to lock destinations.
• Enable Destination Protect.
Check ‘Enable Destination Protect’ to allow the panel operator to protect destinations.
• Source Master Default.
Makes a control-level source the controlling device (or master device) by default. Otherwise,
the destination is the master by default. (The option is specifically for use with NVISION
series machine control routers.)
“Source is master” is used for duplication, or broadcast routing, on a machine control level.
“Destination is master” is for machine-to-machine editing. If you do not select the “source
master default” option, you can place a ‘Source is Master’ button on the panel.
 Note: a ‘Source is Master’ button is a toggle that reverses the direction of data routing
for devices used in data level (machine control) takes.
• Hide sources not configured on this panel.
Causes the names of source devices that are not presently configured for this particular
panel to be effectively hidden. When another panel changes the source to one not config-
ured for this panel, this panel displays asterisks instead.
• Deselect all destinations and turn off hold after take.
After selecting many MD destinations (with ‘Hold’ mode on), it can be time-consuming and
error-prone to find them all (and no others) to deselect them after a take. When you enable
this option, the NV9601 does exactly that (and turns off hold mode).
• Jump to multi-dest selection when switching to XY.
Makes the currently selected multi-destination device the current destination when you
switch from MD mode to X-Y mode.
 The X-Y destination shown will be the default destination when the panel is in MD “hold”
mode and multiple destinations are selected
— if a default destination is specified in the
configuration. Otherwise, no destination will be selected.
• Flip-flop source and preset after take.
Swaps the preset source and the currently routed source for this destination after a take.
• Use continuous scrolling.
If you check this box, the panel scrolls MD destinations continuously. That is, the MD destina-
tion pages wrap around at the beginning and at the end of the page list.
If you uncheck this box, the panel will stop scrolling when it reaches either the beginning or
end of the MD device list.
This option does not affect scrolling of salvos when the panel is in salvo mode or levels when
the panel is in X-Y mode.