Grass Valley NV9601 v.2.2 - Manual (Page 28)

18
Configuration
Panel Options
Panel Options
The panel options section, at the right of the configuration page, has two parts: drop-down
menus and checkbox options. These are the drop-down menus:
The minimum number of destinations for multi-destination mode is 8. If you have the minimum,
there is no need for scrolling during configuration. You may leave some (or all) MD destinations
undefined. Scrolling is disabled unless you have chosen more than 8 destinations as the multi-
destination device limit.
These are its drop-down menu options:
Panel Type XY / Multidest
Modes Panel can be used in either XY or multidest modes. If this option is
chosen, place an XY/MD button on the panel.
Multidest Only Locks the panel in multidest mode. XY mode cannot be accessed.
XY Only Locks panel in XY mode. Multidest mode cannot be accessed.
Preset Monitor None The preset source video is not sent to a monitor.
‹device› The preset source video for the selected destination appears on
the specified monitor (device).
Status Monitor None The current source video is not sent to a monitor.
‹device› The current source video for the selected destination appears on
the specified monitor (device).
Default Mode X-Y Mode Starts the panel in XY mode after a reset. See Defaults on page 60.
Multi-Dest Mode Starts the panel in multi-destination mode after a reset.
Release Mode Normal Release This panel can release “locks” and “protects” set by the designated
user (at this panel or any other panel).
Force Release This panel can release locks and protects set by any user.
Default
Destination None After a reset, the panel displays no destination device. (This is not
recommended.)
‹device› The Panel uses the specified device as the destination after a reset.
(The ‘Default State’ button also returns the panel to this destina-
tion.)