Grass Valley NV9601 v.2.2 - Manual (Page 53)

43
NV9601
User’s Guide
Without hold enabled, the panel has no destinations selected after an MD take and the buttons
for the selected destinations go low-tally.
When hold is active, all selected MD destinations get the source you selected most recently (in
case you change your mind and selected another source).
X-Y Mode
In X-Y mode, the hold button causes breakaway levels to be retained after a take. The levels you
selected (and deselected) remain selected (or unselected) as they were before the take.
Information
The ‘Information’ button causes the panel to present auxiliary information on the alphanumeric
display. Such information might be level-mapped sources.
Level Map
The ‘Level Map’ button cross-connects levels (typically in the same physical router). The function
is typically used to shuffle audio channels, for example, to connect AES 1/2 to AES 3/4.
Follow these steps to create a level mapping:
1 Select a source. Here, the source is CAM-14:
2 Press ‘Level Map’. The button goes bright and the display tells you to “Select Source Level.”
Press a selection button to select a level.
3 The display now says “Select Dest Level.”
X – Y –––––––– –––––––– HD X – Y –––––––– –––––––– HD
Dest CAM–14 CAM––1 SD Dest CAM–14 CAM––1 SD
VTR––1 CAM–14 CAM––1 AUDIO 1 VTR––1 CAM–14 CAM––1 AUDIO 1
CAM–14 CAM––1 AUDIO 2 CAM–14 CAM––1 AUDIO 2
CAM–14 CAM––1 AUDIO 3 CAM–14 CAM––1 AUDIO 3
CAM–14 CAM––1 AUDIO 4 CAM–14 CAM––1 AUDIO 4
–––––––– –––––––– TIMECODE –––––––– –––––––– TIMECODE
Page 1 Page 1
X – Y –––––––– –––––––– HD X – Y –––––––– –––––––– HD
Dest CAM–14 CAM––1 SD Dest CAM–14 CAM––1 SD
VTR––1 CAM–14 CAM––1 AUDIO 1 VTR––1 CAM–14 CAM––1 AUDIO 1
Select CAM–14 CAM––1 AUDIO 2 Select CAM–14 CAM––1 AUDIO 2
Source CAM–14 CAM––1 AUDIO 3 Source CAM–14 CAM––1 AUDIO 3
Level. CAM–14 CAM––1 AUDIO 4 Level. CAM–14 CAM––1 AUDIO 4
–––––––– –––––––– TIMECODE –––––––– –––––––– TIMECODE
Page 1 Page 1
X – Y –––––––– –––––––– HD X – Y –––––––– –––––––– HD
Dest CAM–14 CAM––1 SD Dest CAM–14 CAM––1 SD
VTR––1 CAM–14 CAM––1 AUDIO 1 VTR––1 CAM–14 CAM––1 AUDIO 1
Select CAM–14 CAM––1 AUDIO 2 Select CAM–14 CAM––1 AUDIO 2
Dest CAM–14 CAM––1 AUDIO 3 Dest CAM–14 CAM––1 AUDIO 3
Level. CAM–14 CAM––1 AUDIO 4 Level. CAM–14 CAM––1 AUDIO 4
–––––––– –––––––– TIMECODE –––––––– –––––––– TIMECODE
Page 1 Page 1