Configuration tasks, Commitment buttons – Grass Valley NV9601 v.2.2 User Manual
Page 27
17
NV9601
User’s Guide
tion to edit the multi-destination device list. Right-click the display to edit the panel’s salvo
list. Click the ‘Page Up’ or ‘Page Down’ button to scroll the display representation.
When you are editing the salvo list, right-click the display to return to the multi-destination
device list. When you are editing the salvo list, you can add or remove (1) system salvos and
(2) local salvos.
Click a line in the display to add or remove a system salvo. Control-click a line in the display
to add, remove, or rename a local salvo. See
for more detail.
Among the function buttons at the far right of the graphic are 10 buttons colored yellow.
These are category buttons. They can also be considered a keypad. (In fact, these buttons are
used for the keypad under setup mode and menu mode.) They cannot be configured as
other than category buttons. See
on page 38.
The selection buttons (under the display) cannot be configured.
Buttons disabled during operation are dark on the control panel. Undefined buttons are
also dark.
•
Button definition section.
In this section, configurers make button assignments, using its pull-down menus and text
fields.
See
, following.
•
Panel options.
In this section, configurers may specify the behavioral characteristics of the panel.
Configuration Tasks
The person configuring an NV9601 panel will want to consider how best to utilize the fixed
number of function buttons to support the devices and routers in the router control system at
hand. The task is non-trivial.
In support of that effort, the configurer will do the following:
•
Select panel options.
•
Assign functions to buttons.
The panel operator, in most cases, needs a ‘Take’ button. In addition to their basic function,
selection buttons provide feedback about the preset source device and level mapping. A ‘Clear
Preset’ button is strongly recommended.
Commitment Buttons
Two buttons at the bottom of the configuration page are self-explanatory and present on most
configuration pages:
•
Revert to Saved. Press this button if you want to discard any recent changes you have made.
•
Save. Press this button to commit all your recent changes.
Neither of these actions is reversible.