Grass Valley NV9601 v.2.2 - Manual (Page 65)

55
NV9601
User’s Guide
Some of the selection buttons corresponding to the commands will become enabled and the
others will become disabled as you progress.
For instance, you cannot pause a salvo recording until you have started recording. That is why
the selection button for ‘Start’ is initially enabled and the selection button for ‘Pause’ is disabled.
Once you have started recording, the ‘Start’ button becomes a ‘Stop’ button.
To record a salvo:
1 Press selection button 1 to start recording.
2 Press the menu button to return to normal operating mode.
3 Carry out the tasks that you want to be included in the salvo, in the order you want the tasks
to occur.
4 Press the menu button and then press selection button 5 to return to the salvo menu.
5 To finish recording the salvo, press selection button 1 (Stop Salvo Record).
6 To save the salvo, press selection button 3.
Choose a locally defined salvo name from the list:
You might need to scroll to see the salvo name in which to store the recorded commands.
(The local salvo names were defined during panel configuration and can only be changed or
removed by reconfiguring the panel.)
To erase a salvo, press selection button 5 (Clear Local salvo) and choose a salvo. You might need
to scroll to see the salvo you want to erase.
This will erase the commands in the salvo, but it will not remove the local salvo name from the
list of local salvos.
Menu Stop Salvo Record 1
Salvo Pause Salvo Record 2
Save Salvo 3
Cancel Salvo Record 4
Clear Local Salvo 5
Exit 8
Menu
Salvo
Save
Selection button to save salvo,
Clear to cancel, LSVO1 5
Or Menu to exit. LSVO2 6
Menu
Salvo
Erase
Selection button to erase salvo,
Clear to cancel, LSVO1 5
Or Menu to exit. LSVO2 6