Encode vbi web page – Grass Valley Kameleon HD Multi-Function Modules v.2.5.0 User Manual
Page 90
90
Kameleon HD—Instruction Manual
Initial Configuration Process Overview
Encode VBI Web Page
Use the Encode VBI web page (
for 525,
for 625 line rate) to configure the VBI and Data Line encoding for
the composite output signal on modules with composite outputs. The cur-
rently detected line rate will be reported in the
Down Converter Output Line Rate
in the header. Data lines are configured on the System Config web page.
View Select
Select the correct line rate for configuration with the
525
or
625
radio button
in the View Select box.
VBI Lines/Data Lines
This web page allows you to configure VBI/Data lines on a line-by-line
basis for the composite output when the input an SD signal. Select the fol-
lowing for VBI and data lines in Field 1 and Field 2 or select
All
to apply the
control to every line or
None
to remove the control from every line:
•
Setup –
turn setup on or off.
•
Blank
– blank existing VBI and Data Line information.
•
Chroma Kill
– remove all chroma from VBI and Data Lines with the
Chroma Kill control.
Use
this
link