Grass Valley Kameleon HD Multi-Function Modules v.2.5.0 User Manual
Page 47
Kameleon HD—Instruction Manual
47
Initial Configuration Process Overview
For modules without frame sync, when the Output Timing source is
selected as
Frame Reference
,
the start of any line of the output signal will sync
to the start of any horizontal line in the frame reference.
Split Screen
Use a horizontal or vertical split screen to compare the unprocessed input
video (top or right) to the processed output video (bottom or left).
•
Split Enabled –
enable the split screen by checking the Split
Enabled
checkbox.
•
Orientation
– set the orientation of the split screen with the
Vertical
or
Hor-
izontal
radio button.
•
Position
– use the
Position
control to set the amount of horizontal or ver-
tical split (10 to 90%) of unprocessed video to appear on the screen.
This control is the same as the other Split Screen controls on the Color
Correction, HD Video Proc, and SD Video Proc web pages for the
KAM-HD-FS, KAM-HDD-FS, and KAM-HDD-PA modules.
KAM-HD-FS System Config Web Pages
The System Config web pages for the KAM-HD-FS module are shown in
for an HD input type selected and
for an SD
input type selected.
Figure 29. KAM-HD-FS System Config – HD Input Type