Grass Valley Kameleon HD Multi-Function Modules v.2.5.0 - Manual (Page 34)

34 Kameleon HD—Instruction Manual
Initial Configuration Process Overview
Kameleon HD Links and Web Pages
The 2000 GUI provides the following links and web pages for the KAM-HD
series modules:
• Status – reports input, reference, and frame bus status and module
information (
page 37 ),
• I/O Config – shows a graphic representation of inputs and outputs to
the module and allows naming of the input and output signals
(
page 39 ),
• System Config – provides output timing selection, input video type
select, video rate select, video processor enable, color bars test signal
enable, a split screen control, and an advanced view for VBI configura-
tion (
page 45 ),
• Functional View – shows a block diagram of the module with links to
each module configuration page (
page 60 ),
• HD and SD module configuration pages for setting up the module
(
page 71 ),
• E-MEM® – provides Standard and Advanced E-MEM for Learn and
Recall functions for up to 5 E-MEM registers, and Recall of Factory set-
tings and names (
page 95 ), and
• Slot Config – provides a Locate Module function, Slot Identification
fields, Slot Memory, and links to the Frame Health, LED, and SNMP
Trap reporting web pages on the 2000NET module (
page 100 ).
The KAM-HD-FS module links are shown in Figure 17 for available web
pages when an HD input type is selected (left) or an SD input (right).
Figure 17. KAM-HD-FS Web Page Links