Grass Valley Kameleon HD Multi-Function Modules v.2.5.0 - Manual (Page 71)

Kameleon HD—Instruction Manual 71
Initial Configuration Process Overview
Module Configuration Web Pages
Module configuration and monitoring is provided for the following HD or
SD functions (depending on video input type) with the web browser GUI
or control panel interface:
• HD or SD Video In ( page 72 )
• HD or SD Frame Sync ( page 73 )
• HD or SD Color Correction ( page 77 )
• HD Video Proc ( page 79 )
• HD Video Out ( page 81 )
• Down Converter ( page 82 )
• SD Video Proc ( page 85 )
• SD VBI ( page 87 )
• SD Video Out ( page 89 )
• Encode VBI ( page 90 )
• Composite Out ( page 92 )
Note Presence of some web pages depends on module type and system configu-
ration. HD or SD video input type is set on the System Config web page.
A summarized list of all control parameters and default values is given in
a Configuration Summary table on
page 21 .
Use the Defaults button on the bottom left of the configuration web pages to
return the values on that page to the defaults listed in the Configuration
Summary table.
Note Pressing the Defaults button on the System Config web page will reboot the
module as it resets the Input Type. Refer to
System Configuration on page 45 .
Select the Back , Functional View , or Next (HD, SD and Composite) link to navigate
to the next function or use the links on the left of the web page. Return to
the
Functional View at any time for configuration flow or to see where the
control is in the block diagram for the module.
Note KAM-HDD-FS web pages will be shown in this module configuration section.
Differences between other modules will be noted in text.