Grass Valley K2 Level 2 RAID Oct.10 2006 - Manual (Page 52)

52 Level 2 RAID Instruction Manual September 8, 2006
Chapter 3 Servicing the K2 Level 2 RAID
1. Set DIP switches the FC-AL switches on a replacement controller to be the same
as that of the defective controller. Set the chassis address switch and the diagnostic
switch on a replacement expansion adapter to be the same as that of the defective
expansion adapter. For the switch locations, see
“Addressing requirements” on
page 27 .
2. With the ejector open, insert the replacement module into the empty bay. Make
sure the module is seated.