Grass Valley K2 10G RAID - Manual (Page 62)

18 November 2010 K2 10G RAID Storage Instruction Manual
62
Installing disk module
4. With both hands, hold the sides and underside of the disk module. Remove the disk
module as illustrated in the following diagram.
Installing disk module
CAUTION: If the RAID chassis does not have the redundant controller
option, when a replacement disk module is inserted there can be a 1.5
second disruption. Video record/play is not affected.
Before installing the disk module, make sure that you:
1
Push the circled portion.
2
While pushing
the circled
portion, swing
the lever 40 degrees.
0
2
1
3
!