Grass Valley K2 10G RAID - Manual (Page 10)

18 November 2010 K2 10G RAID Storage Instruction Manual
10
Warnings
The following warning statements identify conditions or practices that can result in
personal injury or loss of life.
Dangerous voltage or current may be present
— Disconnect power and remove battery
(if applicable) before removing protective panels, soldering, or replacing
components.
Do not service alone
— Do not internally service this product unless another person
capable of rendering first aid and resuscitation is present.
Remove jewelry
— Prior to servicing, remove jewelry such as rings, watches, and
other metallic objects.
Avoid exposed circuitry
— Do not touch exposed connections, components or
circuitry when power is present.
Use proper power cord
— Use only the power cord supplied or specified for this
product.
Ground product
— Connect the grounding conductor of the power cord to earth
ground.
Operate only with covers and enclosure panels in place
— Do not operate this product
when covers or enclosure panels are removed.
Use correct fuse
— Use only the fuse type and rating specified for this product.
Use only in dry environment
— Do not operate in wet or damp conditions.
Use only in non-explosive environment
— Do not operate this product in an explosive
atmosphere.
High leakage current may be present
— Earth connection of product is essential before
connecting power.
Dual power supplies may be present
— Be certain to plug each power supply cord into
a separate branch circuit employing a separate service ground. Disconnect both power
supply cords prior to servicing.
Double pole neutral fusing
— Disconnect mains power prior to servicing.
Use proper lift points
— Do not use door latches to lift or move equipment.
Avoid mechanical hazards
— Allow all rotating devices to come to a stop before
servicing.
Identifies a protective grounding terminal which must be connected
to earth ground prior to making any other equipment connections.
Identifies an external protective grounding terminal which may be
connected to earth ground as a supplement to an internal grounding
terminal.
Indicates that static sensitive components are present which may be
damaged by electrostatic discharge. Use anti-static procedures,
equipment and surfaces during servicing.