Grass Valley K2 10G RAID - Manual (Page 21)

21
K2 10G RAID Storage Instruction Manual 18 November 2010
Safety Summaries
Laser compliance
Laser safety requirements
This product may contain a Class 1 certified laser device. Operating this product
outside specifications or altering its original design may result in hazardous radiation
exposure, and may be considered an act of modifying or new manufacturing of a laser
product under U.S. regulations contained in 21CFR Chapter 1, subchapter J or
CENELEC regulations in HD 482 S1. People performing such an act are required by
law to recertify and reidentify this product in accordance with provisions of 21CFR
subchapter J for distribution within the U.S.A., and in accordance with CENELEC
HD 482 S1 for distribution within countries using the IEC 825 standard.
Laser safety
Laser safety in the United States is regulated by the Center for Devices and
Radiological Health (CDRH). The laser safety regulations are published in the “Laser
Product Performance Standard,” Code of Federal Regulation (CFR), Title 21,
Subchapter J.
The International Electrotechnical Commission (IEC) Standard 825, “Radiation of
Laser Products, Equipment Classification, Requirements and User’s Guide,” governs
laser products outside the United States. Europe and member nations of the European
Free Trade Association fall under the jurisdiction of the Comité Européen de
Normalization Electrotechnique (CENELEC).
Safety certification
This product has been evaluated and meets the following Safety Certification
Standards:
Standard Designed/tested for compliance with:
ANSI/UL 60950-1 Safety of Information Technology Equipment,
including Electrical Business Equipment
(Second edition 2007).
IEC 60950-1 with CB
cert.
Safety of Information Technology Equipment,
including Electrical Business Equipment
(Second edition, 2005).
CAN/CSA C22.2 No.
60950-1
Safety of Information Technology Equipment,
including Electrical Business Equipment
(Second edition 2007).
BS EN 60950-1 Safety of Information Technology Equipment,
including Electrical Business Equipment
2006.