Grass Valley iTX Delivery Manager v.2.6 - Manual (Page 43)

37
Delivery Manager
Configuration and Setup Guide
9 Click the browse button for Asset Template Name. The Select Asset Template dialog
appears.
10 Select the required template, so that all of the clips are registered with the same
characteristics. Click OK.
11 Specify the Maximum Concurrent Jobs you want this endpoint to process.
12 In the Ardome Configuration section, complete the following fields:
Setting Description
IP Address Enter the IP address of the Ardome server
User Name Enter the user name, as configured in the Ardome system and provided
by a system administrator
Password Enter the password as configured in the Ardome system and provided
by a system administrator
Transfer Service Enter the name of the transfer service as configured on the Ardome by
the Ardome system administrator.
The Ardome transfer Service is where you configure the iTX store
location where you wish the de-archived media to be transferred to.
13 Click Save then Close.
14 Restart the Delivery Manager service. See Restarting an iTX Service on page 53 for
more information.
15 To use an Ardome endpoint in Search Media mode, you must also complete the steps
described in Additional Setup for Search Media mode , on page 59.
Adding FlashNet Endpoints
Prerequisites for FlashNet Endpoints in Manual Mode
In order to use a FlashNet Archive with Delivery Manager, the following prerequisites must
be met:
• The FlashNet Archive must be running version 6.4.13.003.
• The FlashNet services must be logged on as a user with read/write access to the ITX
NAS.
Configuring a FlashNet Endpoint
To add a FlashNet endpoint:
1 Open an existing configuration profile or create a new one, then add a new endpoint
tab, as described in step 1 and step 2 of Basic Steps for Adding an Endpoint , on
page 15.
2 Click the Select button next to the Endpoint Driver field. The Select Delivery Manager
Driver dialog appears.
3 Select FlashNet and click OK.