Grass Valley iTX Delivery Manager v.2.6 - Manual (Page 21)

15
Configuration Profiles and Endpoint Tabs
Although Delivery Manager provides a blank Default configuration profile on first
installation, it is recommended that you create named profile, as this provides more control
should you need to change endpoints or set up either of the resilience models.
This chapter explains how to create a configuration profile, the basic steps for adding an
endpoint, an overview of the endpoint tab and how to remove a configuration profile.
Summary
Creating a New Configuration Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Basic Steps for Adding an Endpoint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
About Endpoint Configuration Tabs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Removing a Configuration Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Creating a New Configuration Profile
To create a new, named configuration profile:
1 From Windows, click START > All Programs > iTX 2.0 > Delivery Manager Config. The
Select Configuration dialog is displayed.
2 In a blank area of the Select Configuration dialog, right-click and select Add new
configuration from the context menu.
3 A dialog appears with a prompt for the new configuration name. The name you enter
will also be used to identify the corresponding instance in Server Controller Config,
e.g. “CIFS Search” for a CIFS endpoint configured in Search Media mode.
4 Click OK to confirm your selection. The new named configuration profile appears in the
Select Configuration list.
5 Add endpoint tabs to store the configuration for each endpoint you required. For more
information see Basic Steps for Adding an Endpoint , on page 15.
Basic Steps for Adding an Endpoint
To add a new endpoint to a Delivery Manager configuration profile:
1 In the Select Configuration window, select a configuration profile and click OK. A blank
endpoint tab appears.
2 On the blank endpoint dialog, click Add new Endpoint. A blank “new” endpoint tab
appears.