Grass Valley iTX Delivery Manager v.2.6 - Manual (Page 22)

16
Configuration Profiles and Endpoint Tabs
Basic Steps for Adding an Endpoint
3 Click the Select button next to the Endpoint Driver field. The Select Delivery Manager
Driver dialog appears.
4 Select an endpoint driver and click OK.
5 In the Endpoint Name field, enter the name to be used as a reference in the iTX
database.
6 Complete the dialog boxes that appear for the selected endpoint driver.
For information on the properties that are common to most of the endpoints, see
Generic Endpoint Configuration Settings , on page 17.
Specific instructions for each endpoint type can be found on the following pages:
• Adding a CIFS Endpoint , on page 21.
• Adding an FTP Endpoint , on page 24.
• Adding a Pitch Blue Endpoint , on page 26.
• Adding a DIVA Endpoint , on page 27.
• Adding MassTech Endpoints , on page 32.
• Adding a PathFire Endpoint , on page 34.
• Adding Ardome Endpoints , on page 36.
• Adding FlashNet Endpoints , on page 37.
• Adding Core Endpoints , on page 39.
7 If you wish to add another endpoint, click Add New Endpoint.
Another “new” tab appears. Follow step 2 to step 6 on page 16 to configure each new
endpoint.
8 Click Save then Close.