Grass Valley iTX Delivery Manager v.2.6 - Manual (Page 27)

21
Adding Network Share Endpoints
This chapter explains the prerequisites and configuration steps required to add any of the
supported network share endpoints.
Summary
Adding a CIFS Endpoint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Adding an FTP Endpoint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Adding a Pitch Blue Endpoint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Adding a CIFS Endpoint
Configuring a CIFS Endpoint in Content Change (Drop Box) Mode
To add a CIFS endpoint in Content Change (Drop Box) mode:
1 Open an existing configuration profile or create a new one, then add a new endpoint
tab, as described in step 1 and step 2 of Basic Steps for Adding an Endpoint , on
page 15.
2 Click the Select button next to the Endpoint Driver field. The Select Delivery Manager
Driver dialog appears.
3 Select CIFS and click OK.
4 In the Endpoint Name field, enter the name to be used as a reference in the iTX
database. For example, “ CIFS Drop Box ”.
5 Click the browse button for the Content Changed Workflow field. The Select ‘Content
Changed’ Workflow... dialog appears.
6 Select the required workflow for performing drop box actions. This workflow should
register an asset but not transfer the file. For example
DefaultContentChanged_RegisterAndImport .
7 The Post Media Import Workflow field will be automatically populated with
DefaultPostMediaImport .
Note: If you have not got the FPP Transcode Service installed, you will need
to delete this entry.
8 If you are using a Post Media Import Workflow, you can also generate low resolution
versions of clips as they are imported by checking the Generate Proxy checkbox.
9 Click the browse button for Asset Template Name. The Select Asset Template dialog
appears.
10 Select the required template, so that all of the clips are registered with the same
characteristics. Click OK.