Grass Valley 8985FS v.1.2.0 User Manual
Page 32

32
8985FSP/FS/PRC — Instruction Manual
Configuration
The header information on each web page includes the following:
•
Model
and
Description
are read-only generated by the module.
•
Frame Location
is defined on the 8900 Series GeckoFlex Frame Configura-
tion web page.
•
Slot
number reports the module’s location in the frame.
•
Input Video Standard
reports the input video type and rate selected on the
System Config web page.
•
Input Video
reports the status of the video input to the module.
•
Output Timing Source
reports the output timing source (Frame Reference
or Input) chosen on the System Config web page.
•
Split Screen
status is reported (
Enabled
or
Disabled
) as set on the System
Config, Color Correction, or Video Proc Amp web pages on the
8985FSP and 8985PRC modules. Not present on the 8985FS module.
Web pages with configuration parameters each have a
Defaults
button at the
bottom of the page to allow resetting of default parameters for only that
page. Default values for all parameters are listed in
Web Page Links
The web interface GUI provides the following links and web pages for the
8985FSP/FS/PRC modules (
):
•
Status – reports input video and reference signal status, presence of
Fiber Optic and Genlock option submodules, and module information
(
),
•
I/O Config – shows a graphic representation of inputs and outputs to
the module and allows naming of each input and enabling and dis-
abling of signal reporting (
),
•
Video Input – allows selection of the video input source and provides
the status of all sources, including fiber optic submodule option inputs
(
),
•
System Config – set input video rate and line standard, set output
timing source and control Split Screen function (
•
Frame Sync – provides horizontal and vertical timing and loss of signal
controls for the 8985FSP module (
),
•
Color Correction – provides RGB gain, offset and gamma correction
adjustments and a control for the Split Screen function (
),
•
Video Proc – provides overall video processing for the HD or SD signal
(
),