Grass Valley 8985FS v.1.2.0 - Manual (Page 21)

8985FSP/FS/PRC — Instruction Manual 21
Power Up
Power Up
The front LED indicators and configuration switches are illustrated in
Figure 8 . Upon power-up, the green PWR LED should light and the yellow
CONF LED should illuminate for a few seconds for the duration of module
initialization.
Note When a media module is first plugged into a GeckoFlex frame, the 8900NET
module (if present) may report a momentary fault. This will clear once the
media module has booted up.
Operation Indicator LEDs
With factory default configuration and a valid input signal connected,
the green PWR and (
Figure 8 ) on the top side of the module front edge
should illuminate (refer to Table 1 on page 22 to see the possible oper-
ating indicator combinations).
Figure 8. Front Panel LED Indicators