Remote configuration and monitoring, Local/remote jumper, 8900net module information – Grass Valley 8985FS v.1.2.0 User Manual
Page 26
26
8985FSP/FS/PRC — Instruction Manual
Configuration
Remote Configuration and Monitoring
8985 module configuration and monitoring can be performed using a web
browser GUI interface or a networked Newton Control Panel when the
8900NET Network Interface module is present in the GeckoFlex frame.
Each of these interfaces is described below.
Local/Remote Jumper
The on-board jumper Local/Remote jumper, J5, must be set for local and
remote operation (LOC/REM position, pins 2-3) or to lock out remote
control (LOCAL position, pins 1-2).
Figure 9. Module Configuration Switches and LEDs
8900NET Module Information
Refer to the 8900NET Network Interface Module Instruction Manual for infor-
mation on the 8900NET Network Interface module and setting up and
operating the GeckoFlex frame network.
Note
The 8900NET module in the GeckoFlex frame must be running software
version 4.0.1 or higher for proper remote and control panel operation.
Upgrade software and instructions for the 8900NET can be downloaded from
the Grass Valley web site.
Local/Remote
Jumper, J5