Grass Valley 8985FS v.1.2.0 - Manual (Page 25)

8985FSP/FS/PRC — Instruction Manual 25
Configuration
Video Processing Adjustments
Component level (Y, Cr, Cb) adjustments are provided in the Video pro-
cessor for video gain and offset, chroma gain, phase control (hue), and color
saturation. Each color component can be adjusted separately or the total
gain can be adjusted.
User Settings
Module default parameters and default signal names can be recalled at any
time for the entire module or subsets of parameters such as the color cor-
rector or video processor.
On the web pages, a Defaults button at the bottom of each applicable web
page is available to return the parameters on that page to the factory
defaults.
Save and load module configuration to/from a file are also provided on the
web pages.
Video Outputs
When there is a 1310NM-DTL (2 outputs) or 1310NM-TRL (1 output) fiber
optic submodule installed, one or both fiber outputs must be enabled for
operation.