Grass Valley 8977AP-4B - Manual (Page 50)

50 8977AP-4B/4U — Instruction Manual
Remote Configuration
Genlock Bus Timing
Use the following controls to adjust the output timing of the genlock refer-
ence signal from this submodule:
• Line Offset – adjust the reference timing stream by standard definition
line steps up to one full frame.
• Coarse Offset – provides coarse adjustment of the reference timing stream
by steps up to 37 ns.
• Fine Offset – provides fine adjustment of the reference timing stream by
steps up to 37 ns.
Drive Frame Reference Bus – Set to Auto or Off . If Auto is selected, Ref 1 or
Ref 2 is provided if it is locked.
If Off is selected, the reference on the frame bus is not sent out.
Defaults Button
Select the Defaults button to restore the default genlock parameters.