Grass Valley 8977AP-4B - Manual (Page 18)

18 8977AP-4B/4U — Instruction Manual
Power Up
Power Up
Upon power-up, the green PWR LED should light and the CONFIG,
FAULT, and COMM LEDs should illuminate during the module initializa-
tion.
Note When a module is first plugged into a GeckoFlex frame, the 8900NET module
may report a momentary fault. This will clear once the module has booted up.
Operation Indicator LEDs
The on-board LED indicators on the front of the module are illustrated in
Figure 8 . Refer to Table 1 on page 20 to see a complete list of possible oper-
ating conditions and the resulting indicator status of all LEDs.
Figure 8. LED Indicators - Front View of 8977AP Module
8521_06