Grass Valley 8977AP-4B - Manual (Page 31)

8977AP-4B/4U — Instruction Manual 31
Remote Configuration
I/O Web Page
Use the I/O Config web page for the following:
Rear Module Configuration
All of the input and output connectors on the corresponding 8977AP-4U or
8977AP-4B rear module are illustrated on the I/O Config web page.
The inputs can be configured with the following controls:
• Signal Names – type of the desired input name (up to 12 characters) into
the corresponding boxes for each input. The status of each input is indi-
cated by the color of the display, the legend is under the table.
• Reporting – raises alarms and warnings. The Status Reporting can be
enabled or disabled by selecting or deselecting the corresponding
checkbox in the
Reporting column for each input.
Figure 18 for the 8977AP-4U and Figure 19 on page 32 for the 8977AP-4B
show the connectors of the two different rear modules available to cable
balanced or unbalanced audios.
Note The outputs are not monitored in this application.
Figure 18. I/O Config Web Page for the 8977AP-4U
Use
this
link