Grass Valley 8977AP-4B - Manual (Page 16)

16 8977AP-4B/4U — Instruction Manual
Cabling
Cabling
Cabling to the 8977AP-4B and 8977AP-4U modules is done on the BNCs of
the 8900UE-R rear module or the three pin connectors on the 8900BA-R rear
module. Refer to
Figure 6 (8900BA-R) and Figure 7 on page 17 (8900UE-R)
for a detailed illustration of the rear connections.
The I/O Config web page ( Figure 18 on page 31 for the 8977AP-4U and
Figure 19 on page 32 for the 8977AP-4B) shows the inputs and the outputs
assigned to the different connectors of the rear modules.
The 8977AP-4B and the 8977AP-4U outputs conform to the audio stan-
dards listed in the output specifications in
Table 3 on page 56 .
Figure 6 gives the inputs and the possible audio output connections for the
8977AP-4B modules. Balanced audio pinouts (+/-/ G) are also illustrated.
Note J10 and J12 are not used in this release.
Refer to Figure 7 on page 17 for the 8900UE-R inputs and outputs illustra-
tion.
Figure 6. 8900BA-R Rear Module
8900BA-R
Reference Input
Audio Delay
Tracking Input
AES 1 Input
AES 2 Input
AES 3 Input
AES 4 Intput
AES 1 Output
AES 2 Output
AES 3 Output
AES 4 Output
Not Used
Not Used
8521_10
+
G
+
G
+
G
+
G
+
G
+
G
+
G
+
G