Grass Valley 8925EMB-B v.2.1.6 User Manual
Page 55
8925EMB-B and -U — Instruction Manual
55
Specifications
Table 6. Environmental and Miscellaneous Specifications
Environmental / Miscellaneous
Frame temperature range
Refer to GeckoFlex Frames 8900FX/FF/FFN Signal Processing
Systems Instruction Manual at:
Operating humidity range
Non-operating temperature
Safety
ANSI/UL60950-1
Safety of Information Technology Equipment, including Electri-
cal Business Equipment (2003).
CAN/CSA C22.2, No. 60950-01
Safety of Information Technology Equipment, including Electri-
cal Business Equipment.
cULus certification
File number: E300838
IEC 60950-1
Safety of Information Technology Equipment, including Electri-
cal Business Equipment (2003).
EN60950-1
Safety of Information Technology Equipment, including Electri-
cal Business Equipment (2001).
73/23/EEC Low voltage directive
(19/02/73) amended by 93/68/EEC (22/07/93)
89/336/EEC directive
(05/05/89) amended by 93/68/EEC (22/07/93)
EMC
FCC Class A
CISPR Pub. 22 (1985)
EN55103-1
(1997)
EN55103-2
(1997)
EU marking
93/68/EEC
(22/07/93)
Climatic
specifications
ETS 300 019-1-3 class 3.1
(Feb. 1992)
Operating temperature (for 8900FFN model): + 0°C to + 45°C
Operating humidity: 10% to 95% non-condensing
ETS 300 019-1-1 class 1.1
(Feb. 1992)
Storage temperature: - 10 °C to 70°C
MTBF at 40°C
8925EMB front module
653,000 hours
8900UVF/BVF-R rear module
26,385,000 hours
Table 7. Digital Video Specifications
Digital Video Input
Serial digital video input signal
SMPTE 292M (HD) and SMPTE 259M-C (SD) compliant
Number of inputs
1 HD/SD (J9)
Connector type
BNC
Jitter tolerance
RP184-1996 compliant
Input return loss
>15dB (5 MHz - 1.485 MHz)
Input impedance
75 ohms
Maximum cable length equalization
HD: 120m Belden 1694A, SD: 320m Belden 1694A
Digital Video Outputs
Serial digital video output signal
SMPTE 292M (HD) and SMPTE 259M-C (SD) compliant
Active loop through output
1 reclocking output (J7)
Number of outputs, names
3 HD/SD outputs (J5, J6, J8)
Connector type
BNC
Signal level
800 mV ± 10%
Equalization
If coax input selected