Grass Valley 8925EMB-B v.2.1.6 - Manual (Page 29)

8925EMB-B and -U — Instruction Manual 29
Remote Configuration
I/O Config Web Page
Use
this
link
Use the I/O Config web page ( Figure 12 for the 8900UVF-R rear module
and Figure 13 on page 30 for the 8900BVF-R rear module) for the following:
8900UVF-R Rear Module Configuration
All of the input and output connectors on the corresponding 8925EMB-B or
8925EMB-U rear module are illustrated on the I/O Config web page. The
inputs can be configured with the following controls:
• Signal Names – type of the desired input name (up to 12 characters) into
the corresponding boxes for each input. The status of each input is indi-
cated by the color of the display. The color legend is under the table.
Note The status color yellow can also indicate that the input is invalid.
• Reporting – the status reporting of the input can be enabled or disabled
at the module level by selecting or deselecting the corresponding
checkbox in the
Reporting column for each input.
Figure 12. I/O Config Web Page – 8900UVF Rear
Note The outputs are not monitored in this application.