Grass Valley 8925EMB-B v.2.1.6 - Manual (Page 16)

16 8925EMB-B and -U — Instruction Manual
Cabling
Cabling
Cabling to the 8925EMB-B or 8925EMB-U module is done on the
8900BVF-R rear module (balanced audio inputs) or the 8900UVF-R rear
module (unbalanced audio inputs).
The I/O Config web page shows the inputs and the outputs assigned to the
different connectors of the rear modules. Cabling of the rear module
depends on what optional fiber optic SFP device is installed as below:
• 8925EMB-B and 8925EMB-U without optional fiber optic SFP device
(electrical only),
• 8925EMB-B and 8925EMB-U with SFP-13103G-M1DRX, Dual Receiver
Fiber Optic SFP device
• 8925EMB-B and 8925EMB-U with SFP-13103G-M1DTX, Dual Trans-
mitter Fiber Optic SFP device, and
• 8925EMB-B and 8925EMB-U with SFP-13103G-M1TRX, Transceiver
Fiber Optic SFP device.
The 8925EMB-B and the 8925EMB-U will accept any of the video standards
listed in the input specifications in
Table 5 on page 54 . Configure the stan-
dards accepted by the module on the System Config Web Page on page 31 .
Table 2 below gives the inputs and the possible video output connections
for the 8925EMB rear modules. The cabling is illustrated in Figure 5 on
page 17 for the 8900BVF-R rear module and Figure 6 on page 17 for the
8900UVF-R rear module.
Table 2. 8925EMB Rear Cabling
Option
Video Inputs
Coax
Audio Inputs Video Outputs
Reclocked Video
Output
Optical Inputs Optical Outputs
Without optical option J9 J1, J2, J3, J4 J5, J6, J8 J7 N/A N/A
With Dual Receiver J9 J1, J2, J3, J4 J5, J6, J8 J7 Fiber 1 or Fiber 2 N/A
With Dual Transmitter J9 J1, J2, J3, J4 J5, J6, J8 J7 N/A Fiber 1 and Fiber 2
With Transceiver J9 J1, J2, J3, J4 J5, J6, J8 J7 Fiber 1 Fiber 2