Grass Valley 8925EMB-B v.2.1.6 - Manual (Page 45)

8925EMB-B and -U — Instruction Manual 45
Remote Configuration
Figure 23. Choose File Screen
Click on the file you wish to load and select the Open button. This will
place the file in the Load Settings web page Enter filename field.
Select the Load button on the Load Settings web page ( Figure 22 on
page 44 ) to load this file configuration into the module.
Set Factory Defaults Button
Select the Set Factory Defaults button to recall factory settings to the entire
module. Refer to the Configuration Summary table on Table 13 on page 61
for a complete list of parameter defaults and ranges.
Set Factory Names Button
Select the S et Factory Name s button to recall factory signal names to the
module. Defaults for all signal names are displayed on the I/O Config web
page shown in
Figure 12 on page 29 and Figure 13 on page 30 .