Grass Valley 8925EMB-B v.2.1.6 - Manual (Page 48)

48 8925EMB-B and -U — Instruction Manual
Software Updating
Frame Health Reporting
This web page allows configuration of the alarms and warnings that are
reported to the external Frame Health Alarm connector on the rear of the
GeckoFlex frame. Refer to 8900NET Instruction Manual for more details.
LED Reports Link
Select the LED Reports link to open the 8900NET LED Reporting web page.
Normally, every module in the frame will report to the 8900NET module
any Fault, Signal Loss, Reference Loss, or Config Error conditions. These
conditions will be reflected by the status LEDs on the 8900NET module.
Using this web page, any of these conditions can be disabled from being
reported to the 8900NET module for each individual module and other
components (power supplies, fans) in the frame
SNMP Trap Reports Link
Select the SNMP Trap Reports link to open the 8900NET SNMP Reporting
web page. This link will only be present when SNMP Agent software has
been installed on the 8900NET module. This web page allows configura-
tion of which alarms and warnings that are reported to the SNMP manage-
ment software.
Refer to the 8900NET Instruction Manual for complete details on using the
8900NET web pages.
Software Updating
Software updating of the 8925EMB modules is done using the NetConfig
Networking Application PC option available free of charge from Grass
Valley or the microSD method using a memory card and adapter provided
by the customer.
The procedures for updating software are given in the 8925EMB-B and
8925EMB-U Release Notes when software updates become available. All
modular product documentation can be found in PDF format on the Grass
Valley web site at this link:
www.grassvalley.com/docs/modular