Grass Valley 8925EMB-B v.2.1.6 - Manual (Page 40)

40 8925EMB-B and -U — Instruction Manual
Remote Configuration
Audio Embedder Web Page
Use
this
link
Use the Audio Embedder web page ( Figure 17 on page 41 ) to set the audio
to be embedded into which group and stream with the following controls:
Output – gives the name of the audio groups and streams to be processed in
the incoming video signal.
Stream Selection – select one type of processing for each audio Group and
Stream from the choices below.
• Replace with:
• Audio Input 1,
• Audio Input 2,
• Audio Input 3,
• Audio Input 4, or
• Silence.
• Pass Group
• Delete Group
Stream Name – displays the name of the audio stream as defined on the I/O
Config web page or the factory default names.
Resolution – set the pulldown to Auto or force to 20 bit or 24 bit (this control
does not appear when Pass Group is selected).
Processing – reports the audio function performed as Replaced , Passed ,
Inserted , or Deleted .
Status – reports the status of the processed audio as Present , Not Present , or
Forced Silence .
Defaults Button
Select the Defaults button to restore the default Audio Embedder parameters
(Pass Group).