Grass Valley 2000NET v3.1 - Manual (Page 47)

2000NET Instruction Manual 47
2000NET Module Interface
c. Click on the module’s link and then click on Software Update (the
2000NET module link is shown in Figure 35 ).
Figure 35. Network Module Software Update Page
The module’s Software Update page will appear. This form is the
same for all 2000 modules that support network software update.
If the module does not support network software update, the page
will be blank except for the header and status information.
CAUTION Always read the Release Notes for the specific module for download proce-
dure notes that are critical to successful software downloading.
d. In the FTP Server Address field, enter the IP Address of the PC that
has the FTPD installed and running.
e. You can enter the Host Name of the PC that has the FTPD running
into the FTP Server Name field. This is an optional step and can be
omitted.
f. Click on Apply to set the FTP Address.
The web page will refresh and the new FTP address should be dis-
played as the Current Settings.
Click on Software Update to access
the update page.