Grass Valley 2000NET v3.1 - Manual (Page 36)

36 2000NET Instruction Manual
2000NET Module Interface
Media Module Slot Configuration
Media module slots may be named to reflect specific functions for that slot
or module within the facility. The configuration for the module can also be
saved to slot memory on the 2000NET module.
Note Both frame and module names and configuration information can be saved
to file and recalled as necessary. This allows quick and easy reconfiguration
of the 2000NET module if it must be replaced or moved to another frame (see
Set Frame Configuration on page 27 ).
Slot Identification
You may identify the module by typing a specific name in the Name field.
The assigned name is stored on the 2000NET module and travels with the
2000NET module if it is moved to another frame. Select
Default to enter the
factory default module name.
Figure 25. Slot Configuration Page
Use
This
Link
Read-only status of 2000NET
module hardware settings
necessary for enabling
SNMP Trap Reports
Enable/disable specific
SNMP reports for the slot
Read-only severity level
assigned to each event
Name the module slot
Learn module configuration
to this slot
Check box to restore saved config
when new module installed
Enable/disable module
locator function