Grass Valley 2000NET v3.1 - Manual (Page 10)

10 2000NET Instruction Manual
Installation
To install the Network Interface module in the frame:
1. Insert the module, connector end first (see Figure 4 ), with the
component side of the module facing up. Slide the module in until it
stops.
2. Press on the connector tab to seat the module in place. There will be a
positive click when the module is fully seated.
Figure 4. 2000NET Module/Frame Orientation
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(11)
(12) 8046-07
Component side up