Deleting test tunnels, Modifying a test tunnel, Querying test tunnels – H3C Technologies H3C Intelligent Management Center User Manual
Page 68: Performing a basic query, Performing an advanced query
59
Deleting test tunnels
1.
Access the Test Tunnels page.
2.
Select one or more test tunnels.
3.
Click Delete.
A confirmation dialog box appears.
4.
Click OK.
Modifying a test tunnel
1.
Access the Test Tunnels page.
2.
Click the Modify icon
for the test tunnel you want to modify.
The Modify Test Tunnel page appears.
3.
Select a different interface IP address from the Source IP list as the source device IP address.
4.
Select a different interface IP address from the Destination IP list as the destination device IP
address.
5.
Click OK.
Querying test tunnels
Performing a basic query
1.
On the upper right corner of the Test Tunnels page, enter a partial or complete source device name
in the query control
. The source device name is case insensitive.
2.
Click the Search icon . To display all test tunnels, clear the query field and click the Query icon
.
Performing an advanced query
1.
Click the Advanced icon to expand the query area.
2.
Specify one or more of the following query criteria:
•
Source Device Name—Enter a partial or complete source device name. This criterion is case
insensitive.
•
Source IP—Enter a partial or complete source device IP address.
•
Destination Device Name—Enter a partial or complete destination device name. This criterion
is case insensitive.
•
Destination IP—Enter a partial or complete destination device IP address.
•
Latest Test Result—Select an option from the list. Options are:
{
All
{
High
{
Middle
{
Low
{
Faulty
{
Not Tested