H3C Technologies H3C Intelligent Management Center - Manual (Page 33)

24
Table 17 Topology toolbar description
Icon Name Remarks
1:1 Displays the topology in its original size.
Zoom In Zooms in the topology by 10%.
Zoom Out Zooms out the topology by 10%.
Fit Content Resizes the topology to fit the current window.
Magnifier Magnifies an area on the topology.
Bird's Eye View Displays the topology in a bird's eye view.
Full Screen Displays the topology in full screen mode.
/
Hand/Pointer
Tool Switches between the hand tool and the pointer tool. The hand tool is used
for dragging the topology.
Add Background Sets a background image in the topology.
Remove
Background Removes the background image from the topology. This icon is available
only when the background image is applied to the topology.
Save Saves the topology.
Save As Image Saves the topology as a .png file.
Layout Re-arranges the layout of the topology.
Legend Describes the icons and colors on the topology.
Advanced
Settings
Allows for the configuration of advanced settings, such as whether to save
changes before exiting the topology and whether to display hidden
nodes.
Right-click a blank area of the topology to show a shortcut menu, as shown in Figure 25 . It includes the
following parameters:
• Reload—Reloads the whole topology.
• Device Label—Used to select the parameter to be displayed as the device label, including:
{
Show IP
{
Show Label
{
Show SysName
{
Show Vendor
{
Show Device Type
{
No Label
When No Label is selected, the device label does not appear.
• Link Label—Used to select the parameter to be displayed as the link label, including:
{
Show Name
{
Show Interface
{
Show Type
{
Show Device Name
{
Shown Interface Alias
{
No Label