H3C Technologies H3C Intelligent Management Center - Manual (Page 36)

27
• Link Name—Name of the link. By default, it is a combination of the left node name and the
right node name.
• Link Type—Type of the link between the two nodes, such as virtual link and Ethernet link.
• Left Node—Name of the left node.
• Left Interface—Description information about the interface on the left node.
• Right Node—Name of the right node.
• Right Interface—Description information about the interface on the right node.
Figure 29 Link details
Configuring a link
1. Access the Lync Topology page.
2. Right-click a link to display the shortcut menu, as shown in Figure 30 .
Figure 30 Link right-click menu
3. Select Link Information to view basic information about the link, as shown in Figure 31 .