Epson PhotoPC 700 - Manual (Page 34)

2. Press the function button. You will see the display
panel has changed from showing the number of
pictures remaining, to showing exposure adjustment
information. You can also see adjustment
information on the top of the LCD monitor. While
pressing the function button, press the
and
buttons to change the number. Keep pressing the
or buttons to cycle from one setting to
another, as follows:
Note:
If you take your finger off the function button, the
information on the display panel changes to show the
number of pictures remaining. To see the exposure setting
again, simply press the function button again.
3. When you are finished making the setting, just take
your fingers off the buttons.
Note:
o Experience and knowledge of photography is necessary to
correctly adjust exposure. Make sure your exposure
adjustment setting is correct when taking important
photos.
o When the conditions for photography are not very good,
we recommend you take several photos of the same object
using different exposures.
o The exposure adjustment value changes back to AUTO
when the front rotary switch is turned off, or the camera
shuts down due to powerfail.
adjust -2
adjust -1
no adjustment
(default setting)
adjust +1
adjust +2
L Poppy+ Rev.C
A5 size Chapter 2
5/8/98 pass 2
2-12 Taking Pictures with PhotoPC 700