Epson PhotoPC 700 - Manual (Page 26)

Activating the Shutter
Follow the steps below to take photos using the
viewfinder or the LCD monitor.
You can also take photos from your computer using
EPSON Photo!2. To use this feature, see your digital
camera software manual.
Using the viewfinder
1. Turn the camera on and wait until the status light
beside the viewfinder turns green.
2. Look straight through the viewfinder and center your
subject in the cross-hairs.
Note:
The frame in the viewfinder indicates the area captured
when taking pictures at close range.
3. Hold the shutter button halfway down to lock the
auto focus. The status light beside the viewfinder
changes from green to orange. If you wish, you can
now move your subject off-center without altering
the focus.
4. Press the shutter button the rest of the way down to
take the photo.
5. Hold the camera still until the status light starts
flashing red and the camera beeps. Then release the
shutter button.
viewfinder
status light
shutter button
L Poppy+ Rev.C
A5 size Chapter 2
5/8/98 pass 2
2-4 Taking Pictures with PhotoPC 700