Epson PhotoPC 700 - Manual (Page 19)

Attaching the Hand Strap
To attach the hand strap, loop the strap around the
holder on the side of the camera as shown below.
Setting the Language
For PAL model cameras, you need to set the language for
messages displayed on the LCD monitor the first time
you use it. Depending on the country of purchase, you
can choose English, Japanese, French, German, Italian,
Portuguese, or Spanish.
Follow these steps to set the language:
1. Slide the monitor mode switch on the back of the
camera to Playback.
For PAL model cameras, a message stating you need
to set the language appears on the LCD screen. Press
the SELECT, BACK, or navigation buttons, or wait 5
seconds. The language setting screen appears.
2. Press the SELECT button until the language you want
is highlighted.
3. Press the BACK button to save your selection and
return to the View or Playback mode.
If you want to change the language setting, see page 3-16
for instructions.
SELECT button
BACK button
monitor mode switch
navigation
buttons
1
R Poppy+ Rev.C
A5 size Chapter 1
5/8/98 pass 0
Getting Started 1-7