H3C Technologies H3C SecPath F5020 User Manual

Page 40

[Sysname] interface route-aggregation 3

[Sysname-Route-Aggregation3] quit

# Add GigabitEthernet 1/0/1 and GigabitEthernet 2/0/1 to aggregation group 3

[Sysname] interface gigabitethernet 1/0/1

[Sysname-GigabitEthernet1/0/1] port link-aggregation group 3

[Sysname-GigabitEthernet1/0/1] quit

[Sysname] interface gigabitethernet 2/0/1

[Sysname-GigabitEthernet2/0/1] port link-aggregation group 3

[Sysname-GigabitEthernet2/0/1] quit

# Enable BFD MAD on the aggregate interface.

[Sysname] interface route-aggregation 3

[Sysname-Route-Aggregation3] mad bfd enable

# Configure a MAD IP address for each member device on the aggregate interface.

[Sysname-Route-Aggregation3] mad ip address 192.168.2.1 24 member 1

[Sysname-Route-Aggregation3] mad ip address 192.168.2.2 24 member 2

[Sysname-Route-Aggregation3] quit

This manual is related to the following products: