H3C Technologies H3C SecPath F5020 - Manual (Page 38)

29
Displaying and maintaining an IRF fabric
Execute display commands in any view.
Task Command
Display information about all IRF
members.
display irf
Display the IRF fabric topology. display irf topology
Display IRF link information. display irf link
Display IRF configuration. display irf configuration
Display the load sharing mode for IRF
links. display irf-port load-sharing mode [ irf-port
[ member-id/port-number ] ]
Display MAD configuration. display mad [ verbose ]
BFD MAD-enabled IRF configuration example
Network requirements
As shown in Figure 14 , set up an IRF fabric at the core layer of the enterprise network.
Configure BFD MAD on the IRF fabric and set up BFD MAD links between the member devices.
Figure 14 Network diagram