Verifying the configuration – H3C Technologies H3C WX3000E Series Wireless Switches User Manual

Page 38

[AC-WLAN-ESS2] qos priority 3

[AC-WLAN-ESS2] quit

# Disable service template 2 before binding it with interface WLAN-ESS 2.

[AC] wlan service-template 2

[AC-wlan-st-2] service-template disable

[AC-wlan-st-2] ssid office2

[AC-wlan-st-2] bind wlan-ess 2

# Enable service template 2.

[AC-wlan-st-2] service-template enable

[AC-wlan-st-2] quit

# Configure the WLAN-ESS 3 as 5.

[AC] interface WLAN-ESS 3

[AC-WLAN-ESS3] qos priority 5

[AC-WLAN-ESS3] quit

# Disable service template 3 before binding it with interface WLAN-ESS 3.

[AC] wlan service-template 3

[AC-wlan-st-3] service-template disable

[AC-wlan-st-3] ssid office3

[AC-wlan-st-3] bind wlan-ess 3

# Enable service template 3.

[AC-wlan-st-3] service-template enable

[AC-wlan-st-3] quit

Verifying the configuration

Connect a client to each AP. Ping the same PC from the three wireless clients. Capture the packets sent

out interface GigabitEthernet 1/0/1 of the AC, and you can determine the mapped priority of the

packets from each wireless client.

This manual is related to the following products: