beautypg.com

Maintaining application and configuration files, R to, Maintaining application and configuration – H3C Technologies H3C MSR 20-1X User Manual

Page 62: Files

background image

55

NOTE:

The file name, size and path vary in different situations. Before upgrading, check the current version of
BootWare and application program.

Restore the baud rate in the HyperTerminal to 9600 bps after upgrading the BootWare. This ensures that
the information can be displayed on the console terminal after system boot or reboot.

Upgrading the extended BootWare involves only a segment of BootWare. Once an error occurs, you can
re-upgrade BootWare.

Upgrading an Application Program Through a

Serial Interface

Upgrading an application program through a serial interface is implemented under the serial submenu.

Enter 2 in the main BootWare menu to enter the serial interface submenu: For details, refer to

BootWare

Submenus

on page

45

.

The following example illustrates how to upgrade a main application program.
First, change the baud rate of the serial interface to speed up upgrading ((refer to

Modifying Serial

Interface Parameters

on page

52

for details). Then enter 2 in the serial interface submenu. The system

displays:

Please Start To Transfer File, Press To Exit.

Waiting ...CC

Select an application program file and send it. The procedure for upgrading an application program
through a serial interface is similar to that for upgrading BootWare. For the detailed procedure, see

Upgrading BootWare

on page

53

.

NOTE:

Generally an application program is more than 10 MB in size. Even if the baud rate is changed to
115200 bps, it usually takes about 30 minutes to upgrade an application program. Therefore, you are
recommended to upgrade an application program through an Ethernet interface.

Maintaining Application and Configuration Files

You can view and modify a file type in the file control submenu:
Enter 4 in the main BootWare menu to enter the file control submenu. The system displays:

============================================================

|Note:the operating device is flash |

|<1> Display All File(s) |

|<2> Set Application File type |

|<3> Set Configuration File type |

|<4> Delete File |

|<0> Exit To Main Menu |

==========================================================================

Enter your choice(0-4):

This manual is related to the following products: