Panel leds – H3C Technologies H3C MSR 20-1X User Manual
Page 12
5
2.
Rear panel
Figure 4 Rear panel of the MSR 20-11 router
(1)Grounding terminal
(2) Console/Auxiliary port (CON/AUX)
(3) Layer 3 Ethernet interface 0 (ETH0)
(4) Layer 2 Ethernet interface 1
(5) Layer 2 Ethernet interface 2
(6) Layer 2 Ethernet interface 3
(7) Layer 2 Ethernet interface 4
(8) Serial interface LEDs
(9) Serial interface
(10) SIC/DSIC slot
Panel LEDs
respectively describe the LEDs on the front and rear panels of an MSR 20-11 router.
Table 4 Front panel LEDs of the MSR 20-11 router
LED Description
PWR
•
ON: The router is powered on.
•
OFF: The router is powered off.
SYS
•
Green and fast blinking: The system is booting.
•
Green and slow blinking: The system is operating normally.
•
Yellow and fast blinking: The system is faulty.
•
OFF: The system operation is abnormal.
ETH
•
OFF: No link is present.
•
ON: A link is present.
•
Blinking: Data is being transmitted or received.
Table 5 Rear panel LEDs of the MSR 20-11 router
LED Description
LINK
•
OFF: No link is present.
•
ON: A link is present.
ACT
•
OFF: No data is being transmitted or received.
•
Blinking: Data is being transmitted or received.