beautypg.com

H3C Technologies H3C MSR 20-1X User Manual

Page 37

background image

30

Figure 29 Set the connection port in the local configuration

Step2

Set terminal parameters. As shown in the following figure, in the COM1 Properties dialog box of the

serial interface, set bits per second to 9600, data bits to 8, parity to none, stop bits to 1, and flow control
to none. Then, click OK to return to the HyperTerminal window.

Figure 30 Set serial port parameters

Step3

Set HyperTerminal properties. Select File->Properties->Settings from the HyperTerminal window to enter

the properties setting window as shown in the following figure. Set the terminal emulation type to VT100

or auto detect, and click OK to return to the HyperTerminal window.

This manual is related to the following products: