H3C Technologies H3C MSR 20-1X - Manual (Page 51)

44
**************************************************************************
Compiled Date : Jul 29 2008
CPU Type : MPC8323E
CPU L1 Cache : 16KB
CPU Clock Speed : 333MHz
Memory Type : DDR SDRAM
Memory Size : 256MB
Memory Speed : 132MHz
BootWare Size : 1024KB
CPLD Version : 1.0
PCB Version : 3.0
BootWare Validating...
Press Ctrl+B to enter extended boot menu....
NOTE:
•
The extended BootWare menu is referred to as main BootWare menu hereinafter in this manual unless
otherwise specified.
• The sample output above may vary on your device.
If you press Ctrl+B when the system displays “Press Ctrl+B to enter extended boot menu...”, the system
prompts for the BootWare password:
Please input BootWare password:
After you enter the correct password, the system enters the main BootWare menu. (The initial password
is null. You have three chances to provide the correct BootWare password. If you have tried three times
but failed, you need to reboot the system).
Note: The current operating device is flash
Enter < Storage Device Operation > to select device.
====================================================
|<1> Boot System |
|<2> Enter Serial SubMenu |
|<3> Enter Ethernet SubMenu |
|<4> File Control |
|<5> Modify BootWare Password |
|<6> Skip Current System Configuration |
|<7> BootWare Operation Menu |
|<8> Clear Super Password |
|<9> Storage Device Operation |
|<0> Reboot |
==========================================================================
Enter your choice(0-9)
This menu is described as follows: