H3C Technologies H3C MSR 2600 - Manual (Page 45)

38
Power-on check
After the router is powered on, verify that:
• The LEDs on the front panel are normal:
LED Status Description
PWR Steady green The power module is supplying power correctly.
SYS Slow flashing green The router is operating correctly.
• The configuration terminal displays information correctly. For local configuration, the configuration
terminal displays the boot information (see " Startup process .")
• If you press Enter as prompted after system bootup, the router is ready to configure.
Configuring basic settings for the router
After the router is powered on for the first time, configure the basic settings for the router.
For more information about configuring the basic settings for the MSR 26-00-5/10/17 router, see H3C
MSR Routers Fundamentals Configuration Guide (V5) and H3C MSR Routers Fundamentals Command
Reference (V5).
For more information about configuring the basic settings for the MSR 26-30 router, see H3C MSR
Routers Fundamentals Configuration Guide (V7) and H3C MSR Routers Fundamentals Command
Reference (V7).